AU-002
- Network Speaker Driver
- Support SIP and UDP Broadcast Protocol
- Build in 20W Power Amplifier to Drive Speaker Directly
- Powered from the IP Network Cable Using PoE+ IEEE 802.3at
- Remote Configuration and Firmware Upgrade by HTTPS
- Warranty might vary by territory or situation. Please check: VIVOTEK Warranty
Product Specification
Product Information
Rated Impedance
Lower to 3 ohm speaker totally(Driver)
Average Min. Power
20 W
Microphone
100Hz-16KHz Single point, SPL-44 ± 2db AT 2 KΩ
Network
SIP Support
RFC 3261(SIP base standard)
Interface
WAN: RJ-45x1, 10/100Mbps Fast Ethernet port
Supported Protocols
SIP, IPv4/v6, RIPv2 / OSPF, HTTPS, QoS DSCP, FTP, TFTP, SNMP v2c / v3, SNMP, IGMP, DHCP, SSHv2, PIM- DVMRP, RMON
Audio Codec
G.711 a/uLaw, G.726, G.722, G.729, iLBC, L16
Support Function
Auto provision, Audio tone testing, System log
Security
Password protection, IP address filter, user access log, authentication
VSS Integration
Two-way Communication
Supported
Automatic Trigger Audio Clips
Supported
General
Casing
Plastic
Power
PoE+ (Power over Ethernet), IEEE 802.3at
Operating Temperature
-35°C ~ 60°C (-31°F ~ 140°F)
Dimensions
110 x 85 x 25 mm
Weight
115 g
Certifications
CE, FCC, LVD EN62368-1
LED Luminous
3x LED display status
Material
Plastic